iHHD Series
Direct Drive (DD) NC Rotary Table
iHHD-650
- INTRODUCTION
- SPECIFICATION
- DIMENSION
- VIDEO
INTRODUCTION
iHHD series is a customized built-in 4th axis DDM rotary table. It is developed with machine tool manufacturers. If you have requirements for customized DDM rotary tables, please feel free to get in touch with TJR for more information.
SPECIFICATION
| Item | Unit | |
|---|---|---|
| Table Diameter | mm | |
| Diameter of Table Central Hole | mm | |
| Inner Diameter of Mandrel Sleeve | mm | |
| Diameter of Center Through Hole | mm | |
| Table Height (Horizontal) | mm | |
| Table T-slot Width | mm | |
| Guide Block Width | mm | |
| Axis | - | |
| Cooling System | - | |
| Transmission Mechanism | - | |
| Min. Increment | deg. | |
| Indexing Precision | sec. | |
| Repeatability | sec. | |
| Clamping System (Pneumatic) | kg/cm2 | |
| Clamping Torque | Nm | |
| Servo Motor Model | - | |
| Speed Reduction Ratio | - | |
| Rated / Max. Speed | r.p.m | |
| Rated / Max. Cutting Torque | Nm | |
| Allowable Inertia Load Capacity (Horizontal) | kg ∙ cm / sec2 | |
| Allowable Workpiece Load |
0°Horizontal |
kg |
0º~90ºTilt |
kg | |
| Allowable Load (with clamping) |
F |
N |
FxL |
Nm | |
FxL |
Nm | |
| Net Weight | kg | |
| Electrical Specification | ||
| Encoder | - | |
| Voltage (Back E.M.F) |
Vrms/100rpm | |
| Rotor Poles | - | |
| Rated / Max. Current | Arms | |
| Power Rating | KW | |
| iHHD-650 |
|---|
| Ø650 |
| Ø50 x 30 Deep |
| - |
| - |
| - |
| 18H7 |
| - |
| - |
| Water Cooling |
| D.D. Motor |
| 0.001 |
| 20 *¹ |
| 4 |
| Hydraulic 35 |
| 3700 |
| DD Motor |
| Direct Drive |
| 80/210 |
| 554/741 |
| 264 |
| 400 |
| - |
| 40000 |
| 5000 |
| 3700 |
| 479 |
| Heidenhain |
| 125.6 |
| 66 |
| 29.8/75.7(Water Colling) |
| 4.7 |
- ★*¹Indexing precision can be better after installing angle encoder. Please refer to the table on page 70 for more details.
- ★*In accordance with the foreign trade control ordinance, permission of the ministry of economy, trade and industry is required when exporting dual-axis products overseas.
DIMENSION
iHHD-650The 4th & 5th Axis Direct Drive Motor Series
Embedded type
