HAD-210F-HS
Direct Drive (DD) NC Rotary Table
HAD-210F-HS
- SPECIFICATION
- DIMENSION
- VIDEO
SPECIFICATION
| Item | Unit | |
|---|---|---|
| Table Diameter | mm | |
| Diameter of Table Central Hole | mm | |
| Inner Diameter of Mandrel Sleeve | mm | |
| Diameter of Center Through Hole | mm | |
| Center Height (Vertical) | mm | |
| Table Height (Horizontal) | mm | |
| Table T-slot Width | mm | |
| Guide Block Width | mm | |
| Axis | - | |
| Cooling System | - | |
| Transmission Mechanism | - | |
| Min. Increment | deg. | |
| Indexing Precision | sec. | |
| Repeatability | sec. | |
| Clamping System (Pneumatic) | kg/cm2 | |
| Clamping Torque | Nm | |
| Servo Motor Model | - | |
| Speed Reduction Ratio | - | |
| Rated / Max. Speed | r.p.m | |
| Rated / Max. Cutting Torque | Nm | |
| Allowable Inertia Load Capacity (Horizontal) | kg ∙ cm / sec2 | |
| Allowable Workpiece Load (dynamic) |
0°Horizontal |
kg |
| Allowable Load (with clamping) |
F |
N |
FxL |
Nm | |
FxL |
Nm | |
| Net Weight | kg | |
| Electrical Specification | ||
| Encoder | - | |
| Voltage (Back E.M.F) |
Vrms/100rpm | |
| Rotor Poles | - | |
| Rated / Max. Current | Arms | |
| Power Rating | KW | |
| HAD-210F-HS |
|---|
| Ø210 |
| Ø40H7 x 12 Deep |
| - |
| Ø40 |
| - |
| 240 |
| - |
| 14h7 |
| - |
| Water Cooling |
| D.D. Motor |
| 0.001 |
| 20 |
| 4 |
| 6 |
| 310 |
| DD Motor |
| Direct Drive |
| 1900/2880 |
| 48/- |
| - |
| Please refer to the manual |
| 4000 |
| 500 |
| 310 |
| - |
| Electrical Specification |
| Subject to demand and controller |
| 14.2 |
| 22 |
| 26.1 |
| 9.7 |
DIMENSION
HAD-210F-HSThe 4th & 5th Axis Direct Drive Motor Series
(for Horizontal Application)
