-
AR Series:
Ø125-250 Pneumatic brake(Right Side Motor)
-
AR Series:
Ø125-250 Pneumatic brake(Left Side Motor)
-
AR Series:
Ø125-250 Pneumatic brake(Back Side Motor)
-
Multi Spindle:
Ø125-210 Pneumatic Brake
-
HR Series:
Ø210-800 Hydraulic Brake
-
HR Series:
Ø320-400 Hydraulic Brake (Back Side Motor)
-
2-wheel coupled Series:
Ø320 Hydraulic Brake
-
iHHR Series:
Ø400 Hydraulic Brake (Embedded type)
CNC Rotary Tables (Min indexing angle – 0.001˚)
iHHR SeriesHydraulic Brake (Embedded type)
iHHR-400
- SPECIFICATION
- DIMENSION
SPECIFICATION
| Item/Model | Unit | |
|---|---|---|
| Table Diameter | mm | |
| Diameter of Table Central Hole | mm | |
| Inner Diameter of Mandrel Sleeve | mm | |
| Diameter of Center Through Hole | mm | |
| Center Height (Vertical) | mm | |
| Table Height (Horizontal) | mm | |
| Minimum distance between table centers | mm | |
| Table T-slot Width | mm | |
| Guide Block Width | mm | |
| Min. Increment | deg. | |
| Indexing Precision | sec. | |
| Repeatability | sec. | |
| Clamping System (Hydraulic) | kg/cm2 | |
| Clamping Torque | kg-m | |
| Servo Motor Model | FANUC | - |
| MITSUBISHI | Taper shaft | |
| Speed Reduction Ratio | - | |
| Max. Rotation Rate of Table (Calculate with Fanuc α Motor) |
r.p.m | |
| Allowable Inertia Load Capacity (Horizontal) |
kg.cm.sec2 | |
| Allowable Workpiece Load |
Vertical |
kg |
| with Tailstock | kg | |
Horizontal |
kg | |
| Allowable Load (with Rotary Table Clamping) |
F |
kgf |
FxL |
kgf.m | |
FxL |
kgf.m | |
Strength of worm gears |
kg.m | |
| Net Weight (servo motor excluded) | kg | |
| iHHR-400 |
|---|
| Ø 400 |
| - |
| - |
| - |
| - |
| - |
| - |
| 14H7 |
| - |
| 0.001 |
| 15 |
| 4 |
| 35 |
| 200 |
| αiF12/ßiS22 (Straight) |
| HF-204 (Straight) |
| 1：150 |
| 20 |
| 100 |
| - |
| - |
| 500 |
| 4000 |
| 400 |
| 200 |
| 170 |
| - |
DIMENSION
iHHR-400Embedded type
